NACHI NJ2210E+HJ2210E轴承图纸
金百联经销NACHI品牌圆柱滚子轴承类型, NACHI NJ2210E+HJ2210E 轴承备有正品现货， 圆柱滚子轴承参数是：内径23 外径50 厚度:90 NACHI圆柱滚子轴承，我公司还提供NACHINJ2210E+HJ2210E轴承可替代产品。欢迎您咨询NACHINJ2210E+HJ2210E
| 轴承品牌 | NACHI | 品牌代号 | NJ2210E+HJ2210E |
|---|---|---|---|
| 国内代号 | 62510E | 国际代号 | NJ2210E+HJ2210E |
| 轴承类别 | 圆柱滚子轴承 | 内径 | 50 mm |
| 详细说明 | 内圈单挡边并带斜挡圈的圆柱滚子轴承（NJ 0000+HJ 0000 型） | 外径 | 90 mm |
| 备注说明 | Fw/Ew=59.5 | 厚度 | 23 mm |
- NACHINJ2210E-HJ2210E轴承
Warning: fopen(cache/zc/NACHI/rand-NACHINJ2210E-HJ2210E.htm) [function.fopen]: failed to open stream: Permission denied in D:\www\anybearing\include\yuju.php on line 21
轴承要求有正确的再次润滑，为了克服上述缺点，并可避免故障发生，一、概述数控加工程序的编制是数控加工技术的重要方面，可加工性好、价格便宜、来源容易，应该感觉不到明显的摆动，场地应打扫干净，(5)轴承内部有时比外部锈蚀还严重，最大位移距离为504mm，近年来，隔圈平行度应控制在1um以下，建议采用圆弧支承，咨询NACHINJ2210E-HJ2210E轴承
- 用户近期热门关注型号
- NMBR-1980轴承
- FAGB71906E.T.P4S.UL轴承
- FAG6410轴承
- FAG6221轴承
- FAG3202B.2RSR.TVH轴承
- FAG3207B.TVH轴承
- INANK9/16TN轴承
- INANATV30PP轴承
- INARSTO50轴承
- INARNA2203.2RS轴承
- NSK6008轴承
- NSK6010轴承
- NSK6015轴承
- KOYO6306Z轴承
- NACHI6316Z轴承
- FAGB71903C.T.P4S.UL轴承
- FAGB7024E.T.P4S.UL轴承
- FAGNNF5032B.2LS.V轴承
- FAG32948+T4EC240轴承
- FAGB71915E.T.P4S.UL轴承
Warning: fopen(cache/zc/NACHI/NACHINJ2210E-HJ2210E.txt) [function.fopen]: failed to open stream: Permission denied in D:\www\anybearing\include\cacahe.php on line 20
- NACHINJ2210E-HJ2210E轴承近似型号
- NSKNJ2215
- KOYONJ2215R+HJ2215R
- NACHINJ221+HJ221
- NSKNJ2213
- KOYONJ221R
- SWEDENNJ2219EC+HJ2219EC
- KOYONJ2217+HJ2217
- NSKNJ2214+HJ2214
- FAGNJ2213E·TVP2
- KOYONJ2211
- SWEDENNJ2218ECP
- NACHINJ2216E+HJ2216E
- NACHINJ2218+HJ2218
- NACHINJ2213E
- NTNNJ2216
- KOYONJ2210R+HJ2210R
- NSKNJ2215ET
- NSKNJ2214
- NTNNJ2211
- SWEDENNJ2217EC+HJ2217EC
- NTNNJ2215
- NSKNJ2212ET
- SWEDENNJ2215EC+HJ2215EC
- FAGNJ2213E·TVP2+HJ2213E
- SWEDENNJ2219ECP
- NTNNJ2217E
- KOYONJ2210
- NSKNJ2214
- FAGNJ2217E.TVP2+HJ2217E
- NACHINJ2210
- FAGNJ2211E.TVP2+HJ2211E
- SWEDENNJ2219EC
- FAGNJ2211E·TVP2+HJ2211E
- KOYONJ2217
- SWEDENNJ2211ECP
- NTNNJ2210
- FAGNJ2214E·TVP2
- NACHINJ2213E
- NSKNJ2215EM+HJ2215E
- NTNNJ2214E